Kubota — B Rear Wheels

TIRES, WHEELS AND BALLAST 52 B Rear Wheels Rear tread width can be adjusted as shown with the standard equipped tires. To change the tread width 1. Remove the wheel rim and / or disk mounting bolts. 2. Change the position of the rim and / or disk (right and left) to the desired position, and tighten the bolts. A Always attach tires as shown in the drawings. A If not attached as illustrated, transmission parts may be damaged. A When re-fitting or adjusting a wheel, tighten the bolts to the following torques then recheck after driving the tractor 200m (200yards) and thereafter according to service interval.

(See "MAINTENANCE" section.) (1) 260 to 304 N-m (26.5 to 31.0 kgf-m) (2) 343 to 401 N-m (35.0 to 41.0 kgf-m)