61 CAB OPERATION B Control Panel B Operation C Heating 1. Set the mode switch to the , or position. 2. Set the recirculation / fresh air selection lever to the "FRESH AIR" position. To raise the temperature in the CAB quickly, set this lever to the "RECIRCULATION" position. 3. Adjust the blower (1/2/3) switch and the temperature control dial to achieve a comfortable temperature level. (1) Mode switch (2) Temperature control dial (3) Blower switch (4) Air conditioner switch with indicator light (A) "WARM" (B) "COOL" C Mode switch Set the mode switch to the desired position. Air is blown from only the face air outlets. Air is blown from the front, face and door air outlets.
Air is blown from the front and door air outlets. (1) Mode switch (2) Blower switch (3) Temperature control dial C Temperature Control Dial Set this dial at the desired position to obtain the optimum air temperature. Turn the dial in the "WARM" direction to obtain warmer air. Turn it in the "COOL" direction to obtain cooler air. C Blower Switch Air volume can be changed in 3 steps. At the "3" position, the largest air volume is obtained. C Air Conditioner Switch Push this switch to activate the air conditioner. An indicator light will light up when the switch is set to "ON". Push the switch again to turn the air conditioner off, in which case the indicator light will be off.
A With the blower switch at the "OFF" position, the indicator light will not light up even when the air conditioner switch is set to "ON". A To operate the air conditioner after the tractor has not been used for one week or longer, run the engine at idling speed first and then set the air conditioner switch to "ON". Keep this for one minute or so. If the air conditioner switch is set to "ON" with the engine running at high rpm, the compressor may get in trouble.