63 CAB OPERATION C Defrosting or demisting To defrost or demist the windshield, take the following steps. 1. Set the mode switch to the position. 2. Open the front air outlet, door air outlet and direct it to the windshield. 3. Set the recirculation / fresh air selection lever to the "FRESH AIR" position. 4. Set the blower switch and the temperature control dial to the "3" and max "WARM" (end of clockwise) positions, respectively. A If you set the temperature control dial to "COOL" side position at position, cool air will come out from the face air outlets. (1) Mode switch (2) Temperature control dial (A) "WARM" (1) Door air outlet (A) "OPEN" (B) "SHUT"