Kubota — B Checking Water Separator

PERIODIC SERVICE 72 B Checking and Refueling B Checking Water Separator 1. As water is collected in the water separator, the red float is raised. 2. When the red float has reached the white line, close the fuel shutoff-valve, loosen the retainer ring, take out the cup, and clean the cup. Be careful not to break the element. 3. Place the cup back into position. Bleed the fuel system. (See "SERVICE AS REQUIRED" in "PERIODIC SERVICE" section.) To avoid personal injury or death: A Do not smoke while refueling. A Be sure to stop the engine before refueling. 1. Check the amount of fuel by fuel gauge. 2. When the fuel warning indicator lights up, it is time to add fuel.

(1) Fuel tank cap (1) Red float (2) Fuel cock (3) Retainer ring (4) Cup (A) "WHITE LINE" A If water is drawn through to the fuel pump, extensive damage will occur. A Do not permit dirt or trash to get into the fuel system. A Be careful not to let the fuel tank become empty, otherwise air will enter the fuel system, necessitating bleeding before next engine start. A Be careful not to spill during refueling. If a spill should occur, wipe it off at once, or it may cause a fire. A To prevent condensation (water) accumulation in the fuel tank, fill the tank before parking overnight. Fuel tank capacity 175 L