75 PERIODIC SERVICE B Cleaning Evacuator Valve Open the evacuator valve to get rid of large particles of dust and dirt. C Detaching the Panel (LH) 1. Release the air conditioner hoses off the hook. 2. Loosen the wing nut. 3. Hold the handle, slide the air conditioner condenser assembly toward yourself. (1) Evacuator valve (1) Condenser (2) Receiver (3) Handle (4) Wing nut (5) Air conditioner hose (6) Hook (A) "PULL" B Cleaning Grill, Radiator Screen, Intercooler and Oil Cooler To avoid personal injury or death: A Be sure to stop the engine before removing the screen. A The condenser and receiver become hot while the air conditioner is running.
Before checking or cleaning them, wait until they cool down enough. A Do not hold the air conditioner receiver or the air conditioner pipes when sliding out the condenser for cleaning. 4. Lift the panel (LH) until pin (A) clears the hole. 5. Pull the panel (LH). 6. Attaching the panel is performed vice versa. C Detaching the Panel [RH] 1. To open the panel (RH), pull its front outward. 2. Lift the panel until pin (A) clears the hole. 3. Pull the panel. 4. Attaching the panel is performed vice versa. (1) Panel (LH) (2) Pin (A) (1) Panel (RH) (2) Pin (A)