SYSTEM / ECM System FUEL INJECTION CONTROL Purpose: To control the fuel injection according to the command signal from MC. Operation: 1. ECM detects the signals from engine speed sensor, engine position sensor, ambient pressure sensor, coolant temperature sensor, intake manifold pressure sensor, Intake manifold temperature sensor, engine oil pressure switch and common rail pressure sensor, and detects the engine operating condition. 2. When detecting the signal from MC, ECM processes and controls the fuel injection of injector while detecting the engine operating condition. 3. The solenoid valve is attached to the injector.
The solenoid valve controls operation of start and stop for injection according to the signal form ECM. NOTE: MC sends the command signals as shown below. • Target Engine Speed Value • Torque Curve Switching Command Signal (Refer to the Control System group.) T2-2-2