hitachi — Main Circuit

SYSTEM / Hydraulic System Combined Operation Circuit Lift Arm Raise/Bucket Dump When the bucket is dumped with the lift arm raised, pilot pressure shifts the lift arm and bucket spools. Although pressure from the own pump is applied to port LS1 of the priority valve, port LS2 is not pressurized as it is connected to the hydraulic oil tank. As pressure at port LS1 is larger than the spring force of the priority valve, the spool moves rightward. Therefore, pressure oil from the main pump flows to the lift arm cylinder through the check valve and the lift arm spool in the control valve, and raises the lift arm.

Pressure oil from the main pump also flows to the buket cylinder through the check valve, orifice and bucket spool in the control valve, and dumps the bucket. Although lift arm raising operation is more heavy loaded than the bucket dumping operation, pressure oil through the bucket operation circuit flows to the bucket cylinder after passing the check valve and orifice. Therefore, both the lift arm cylinder and the buket cylinder move smoothly. T2-3-8