SYSTEM / Hydraulic System Lift Arm Raise/Right Steering When the steering wheel is turned to the right with the lift arm raised, pilot pressure shifts the lift arm spool in the control valve and the steering valve spool. Pressure from the own pump is applied to port LS1 of the priority valve through orifice 1. Main pressure returning from the steering valve spool through orifice 3 and the spring force are applied to port LS2. Pressure at port LS2 changes in proportion to the steering valve spool movement. When pressure at port LS2 is low, the priority valve spool moves leftward slightly, and when it is high, the spool moves leftward drastically.
Flow rate and direction of the main pump are controlled by the leftward movement of the priority valve spool. The oil flow rate corresponding to the movement flows to the steering valve, and the remainder flow rate flows to the control valve. NOTE: If the steering wheel is turned quickly and largely for reasons of avoiding danger or something, the priority valve spool largely moves leftward, and much of pressure oil from the main pump is supplied to the steering valve. Therefore the front attachment moves slowly. Pressure oil to the steering valve flows to the steering cylinders and the machine turns to the right.
Pressure oil to the control valve also flows to the lift arm cylinder though the check valve and the lift arm spool, and raises the lift arm. In this way, steering and lift arm operations are simultaneously made. T2-3-10