SYSTEM / Hydraulic System Ride Control Circuit (Optional) (Refer to SYSTEM / Control System Electric / the Hydraulic Combined Circuit Control in group.) In front attachment operation, operating pressure from the lift arm cylinders is accumulated in the ride control accumulator through the charge cut spool. When the ride control switch is turned ON, the ride control solenoid valve is excited, and the spool moves downward. As the bottom end of the lift arm cylinder is connected to the ride control accumulator, the rod side of the lift arm cylinder is connected to the hydraulic oil tank.
In this way, the force to raise the front attachment is relieved to the hydraulic oil tank, and the force to lower the front attachment is absorbed by the ride control accumulator. Therefore, the machine travels stably when traveling on rough roads. T2-3-24