SYSTEM / Hydraulic System Steering Shockless Circuit Pilot pressure oil supplied from the steering pilot valve to the spool end of the steering valve is reduced by passing through the orifice inside the steering valve, and is applied to the spool end of the opposite side. In this way, the vehicle shock due to sudden shift of the spool is reduced, and stable steering operation is possible. (Refer to the COMPONENT OPERATION / Steering Valve group.) The steering accumulators are provided in order to reduce the joggling of the vehicle when stopping the steering wheel rotation.
Emergency Steering Circuit (Optional) When traveling, if the main pump delivery is stopped or drastically decreased caused by failure of the engine or the main pump, the pressure sensing signal of the pump delivery pressure switch is transmitted into the monitor controller. Then, the monitor controller starts the motor of the emergency steering pump unit. Pressure oil is supplied from the emergency steering pump for 1 minute. Therefore, steering operation is possible. When 1 minute have passed or when the key switch has been turned OFF after moving the vehicle to a safe place, the emergency steering pump stops. NOTE:
When the engine is started, the monitor unit automatically starts the emergency steering pump unit in order to confirm its function. When the pressure sensing signal of the emergency steering pump delivery pressure switch is transmitted to the monitor unit, the emergency steering pump unit automatically stops. T2-3-28