SYSTEM / Hydraulic System Steering Stop Circuit (Refer to the COMPONET OPERATION / Steering Valve group.) When either of the left or right cylinder is at the stroke end, the stop valve contacts the frame. Then the stop valve closes and pressure oil to the steering valve from the steering pilot valve is blocked. Consequently, as the steering valve spool is in neutral, supply of pressure oil from the main pump to the steering cylinders is stopped. Steering Cylinder Steering Valve Spool Stop Valve Stop Valve Contact External Force Steering Pilot Valve Main Pump Pilot Pump Hydraulic Oil Tank T4GB-02-02-004 NOTE:
The illustration shows the oil flow when the stop valve is closed during the right steering. T2-3-30