hitachi — Preheat Circuit

SYSTEM / Electrical System PREHEAT CIRCUIT (KEY SWITCH: ON) When the key switch is turned to the ON position, terminal B is connected to terminal M inside the key switch. Current from terminal M excites the battery relay through fuse #8 of fuse box A. The battery power is supplied to the intake-air heater relay through the fuse (120A). Current from fuse #7 of fuse box A flows to terminal #39 of ECM. ECM controls the exciting time of the intake-air heater relay. While the intake-air heater relay is excited, power is supplied to the intake-air heater from the intake-air heater relay and preheats it.

While preheating is made, as terminal #50 of ECM is grounded, current flows from terminal #1-24 of the monitor unit to terminal #50 of ECM. Therefore, the monitor unit lights the preheat indicator. If preheating is not made, the preheat indicator lights for two seconds in order to check the bulb breakage of indicator. T2-4-6