SYSTEM / Electrical System Head Light Lighting Circuit When the key switch is turned to the ON position, the power from terminal M of the key switch excites the battery relay through fuse #8 of fuse box A, and the battery power flows to fuse box A and fuse Box B. The battery power from fuse #5 of fuse box A enters the right head light relay. The battery power from fuse #15 of fuse box A enters the left head light relay. The battery power from fuse #12 of fuse box B enters the high beam relay.
When the head light switch is positioned at (Head Light), the power from terminal S lights each of the clearance lights (Refer to Clearance Light Lighting Circuit.), and the power from terminal H flows to the dimmer switch. At this time, if the dimmer switch is turned to Lo (Low Beam), the power enters the right head light relay and the left head light relay. The battery power enters the head lights and lights them by exciting the respective relays. If the dimmer switch is turned to Hi (High Beam), the power excites the high-beam relay, and the battery power enters and lights the high-beam lights.
The power from the dimmer switch also enters terminal 1-22 of the monitor unit and lights the high-beam indicators. T2-4-22