SYSTEM / Electrical System PARKING BRAKE CIRCUIT When the key switch is turned to the ON position, the power from terminal M excites the battery relay through fuse #8 of fuse box A. The battery power flows to parking brake relay 1 through fuse #2 of fuse box B. The power flows to terminal D of parking brake relay 1 through terminal B of parking brake relay 1. The power flows to terminal B of parking brake relay 2 and terminal B of the parking brake switch. The parking brake switch consists of three circuits of ON, NEUTRAL and OFF, and it is kept ON when turned ON, and it is automatically returned to NEUTRAL when turned OFF.
When the parking brake switch is turned to the OFF position, current flows from terminal E of the parking brake switch to terminal A of parking brake relay 2 and the parking brake solenoid valve. At this time, if the engine is not running, parking brake relay 1 is excited as terminal 2-18 of the monitor unit is grounded. Therefore, the parking brake cannot be released as the power between parking brake relay 1 and terminal B of the parking brake switch and terminal B of the parking brake relay is blocked.
If the engine is running, parking brake relay 2 is excited as current from terminal L of the alternator enters terminal 2-2 of the monitor unit and releases grounded terminal 2-18 of the monitor unit. Consequently, a circuit in which electricity flows from terminal C of parking brake relay 2 to terminal A of parking brake relay 2 and the parking brake solenoid valve (self-exciting circuit) is formed. Therefore, the parking brake solenoid valve is activated and the parking brake is released. As the parking brake switch automatically returns to neutral, the circuit from terminal E of the parking brake switch to parking brake relay 2 is blocked.
However, as a self-exciting circuit is formed in parking brake relay 2, current keeps flowing to the parking brake solenoid valve, and keeps the released condition of the parking brake until the key switch is turned to the OFF position or the parking brake switch is turned to the ON position. IMPORTANT: The parking brake cannot be released unless the engine is running. When the parking brake switch is turned to the ON position, terminal A of the parking brake switch is grounded, and parking brake relay 1 is excited. The power to terminal B of parking brake relay 2 and terminal B of the parking brake switch through terminal D of parking brake relay 1 is blocked.
Consequently, the parking brake is applied as parking brake relay 2 and the parking brake solenoid valve are unexcited. T2-4-30