COMPONENT OPERATION / Pump Device Regulator Control Function Regulator has the following three control functions. Control by Pump Control Pressure The pump flow control valve inside the control valve controls pump control pressure (Pi1 - Pi2) in response to the operating stroke of the control lever. The regulator increases or decreases the pump delivery flow in response to the pressure by receiving this pump control pressure (Pi1 - Pi2). When the control lever is operated, pump control pressure (Pi1 - Pi2) lowers, and the regulator increases the pump delivery flow.
If the control lever is returned to neutral, pump control pressure (Pi1 - Pi2) rises, and the regulator decreases the pump delivery flow. Control by Own Pump Pressure Own pump pressure Pd1 enters the regulator. In case this pump pressure exceeds the set P - Q line, the pump delivery flow is decreased and the pressure returns to the P - Q line. Control by Pilot Pressure from Torque Control Solenoid Valve MC (main controller) makes arithmetic operations of the operating conditions of the vehicle body, and transmits the signals to the pump torque control solenoid valve in order to obtain required pump torque.
The pump torque control solenoid valve transmits pump torque control pressure ST corresponding to this signal to the regulator. The regulator decreases the pump delivery flow by receiving the pilot pressure. Flow (Q) Pump Control Pressure (Pi1-Pi2) 0 Flow (Q) Pressure (P) 0 Flow (Q) Pressure (P) 0 T3-1-6 Pressure Increase Flow Rate De