COMPONENT OPERATION / Pump Device PRIORITY VALVE (Refer to the Main Curcuit in the SYSTEM / Hydraulic System group.) The main pump has a built-in priority valve. The priority valve is installed for effectively distributing the main pump delivery oil to the steering valve and the control valve. Operation 1. Before Steering Operation Pressure oil from the main pump flows to the steering valve through port CF. Pressure oil flows to the both ends of the priority valve spool as port CF is blocked. As pressure oil on one end of the spool flows from port LS to the hydraulic oil tank through the steering valve, pressure is lowered.
The spool to both ends of which different pressures are applied overcomes spring force and moves toward port LS, Therefore, the majority of the main pump pressure oil flows to the control valve through port EF. 2. During Steering Operation If the steering is operated and the steering valve spool moves, pressure at port LS rise in response to the movement of the steering valve spool. The spool is pushed up by pressure at port LS and the spring force. Therefore, the main pump pressure oil flows to both port EF and port CF. When the steering valve spool moves to the maximum stroke, the majority of the main pump pressure oil flows to the steering valve through port CF.
Before Steering Operation To Steering Valve From Main Pump To Control Valve Spool Spring T4GB-03-01-018 During Steering Operation To Hydraulic Oil Tank To Steering Valve From Main Pump To Control Valve Spool Spring T4GB-03-01-019 T3-1-18 ort F ort F Port L F S S rt rt Port L S