COMPONENT OPERATION / Control Valve MAIN RELIEF VALVE The main relief valve prevents pressure inside the main circuit from increasing over the set pressure during operation of the cylinder. This prevents oil leakage from the hoses and piping fittings as well as cylinder breakage. Relief Operation 1. Pressure at port HP (the main circuit) acts on the pilot poppet through orifice A of the main poppet and orifice B of the seat. 2. When the pressure at port HP reaches the set force of spring B, the pilot poppet opens and pressure oil flows to port LP (the hydraulic oil tank) through passage A and the periphery of the sleeve. 3.
At this time, the pressure difference arises between port HP and the spring chamber due to orifice A. 4. When this pressure difference reaches the set force of spring A, the main poppet opens, and pressure oil in port HP flows to port LP. 5. Consequently, pressure in the main circuit decreases. 6. If the main circuit pressure decreases to the set pressure, the main poppet is closed by the force of spring A. T3-2-12