hitachi — Overload Relief Valve

COMPONENT OPERATION / Control Valve OVERLOAD RELIEF VALVE (With Make-Up Function) The overload relief valve is provided with the circuit in the bottom side of the lift arm and the bottom and rod side of the bucket. The overload relief valve controls pressure in each front circuit in order not to rise abnormally when each front attachment is operated by external force. It also makes make-up operation by refilling oil from the hydraulic oil tank in order to prevent cavitation when pressure in the front circuit decreases. Rod Side Circuit of Bucket Relief Operation 1. Pressure at port HP (the front circuit) acts on the pilot poppet through the orifice of the piston. 2.

When pressure at port HP reaches the set force of spring B, the pilot poppet opens and pressure oil flows to port LP (the hydraulic oil tank) through passage A and the periphery of the sleeve. 3. At this time, the pressure difference arises between port HP and the spring chamber due to the orifice. 4. When this pressure difference reaches the set force of spring A, the piston and main poppet open, and pressure oil in port HP flows to port LP. 5. Consequently, pressure in the front circuit decreases. 6. If the front circuit pressure decreases to the set pressure, the piston and main poppet are closed by the force of spring A. Make-Up Operation 1.

When the pressure at port HP (the front circuit) decreases lower than the pressure at port LP (the hydraulic oil tank), the sleeve moves to the right. 2. Hydraulic oil in port LP flows into port HP and cavitation is prevented. 3. When the pressure at port HP rises to the set pressure, the sleeve is closed by the force of spring C. T3-2-14