hitachi — Flow Rate Control Valve

COMPONENT OPERATION / Hydraulic Fan Motor FLOW RATE CONTROL VALVE When temperature in the coolant or oil is less than the set temperature, the flow rate control valve supplies necessary amount of pressure oil from the fan pump to the motor, and returns redundant amount of pressure oil to the hydraulic oil tank. This controls to lower the engine load and wind noise of the cooling fan. Operation 1. Pressure oil from port P acts on side A as upstream pressure and on side B as downstream pressure of flow rate control valve spool (8), and pressure difference acts on flow rate control valve spring (12). 2.

When pressure difference becomes higher than the set force, flow rate control valve spool (8) moves and redundant flow rate of pressure oil flows to port T. T3-3-6