COMPONENT OPERATION / Steering Pilot Valve CONSTRUCTION The steering pilot valve consists of gerotor (8), drive (7), sleeve (3), spool (4), pin (5), housing (1) and centering springs (2). When the steering wheel is rotated, spool (4) rotates and an oil passage is provided between spool (4) and sleeve (3). Pressure oil from the brake/pilot pump is controlled by spool (4) and sleeve (3), and flows to the steering valve. Centering springs (2) are installed to both spool (4) and sleeve (3). When the steering wheel is released, centering spring (2) returns sleeve (3) to the neutral position.
11 7 8 10 9 6 1 3 4 5 2 T1F3-03-07-002 2 4 3 1 Port R Port L Hole 5 Port P 9 10 8 7 6 T4GB-03-04-008 1 - Housing 4 - Spool 7 - Drive 10 - Cap 2 - Centering Spring 5 - Pin 8 - Gerotor 11 - Check Valve 3 - Sleeve 6 - Plate 9 - Spacer T3-4-2