hitachi — Operation

COMPONENT OPERATION / Steering Valve When Steering Left 1. When the steering handle is turned to the left, pilot pressure oil is supplied to port Pb from the steering pilot valve and spool (1) moves to the right. 2. Pressure oil from the main pump is supplied to the steering valve from port P, and supplied to passage A (7) through variable orifice (5). 3. Pressure oil in passage A (7) pushes and opens load check valve (4) and flows to the steering cylinder through port B. 4. Returning oil from the steering cylinder enters spool (1) through port A and returns to the hydraulic oil tank through port T. 5.

Pilot pressure oil flowing into port Pb pushes spool (1) at the port Pb side and flows to port Pa after being reduced by fixed orifice (6) at the same time. This reduces the shock caused by fast operation of the handle. (Refer to the Layout on T3-5-2 and the Steering Circuit in the SYSTEM / Hydraulic System group.) NOTE: Opening area of variable orifice (5) is proportional to the stroke amount of spool (1) due to pilot pressure from the steering pilot valve. (Refer to the Steering Circuit in the SYSTEM / Hydraulic System group.) T3-5-6