COMPONENT OPERATION / Steering Valve STEERING OVERLOAD RELIEF VALVE The steering overload relief valve is installed in the left and right steering circuits. The overload relief valve controls pressure in the respective steering circuits from rising abnormally high when the steering cylinder is moved by an external force. Relief Operation Make-Up Operation 1. When pressure at port HP (steering cylinder circuit) becomes lower than pressure at port LP (hydraulic oil tank), the sleeve moves to the right. 2. Hydraulic oil flows into port HP and cavitation is prevented. 3. If pressure at port HP rises to the set pressure value, the sleeve is closed by the force of spring C. 1.
Pressure at port HP (steering cylinder circuit) acts on the pilot poppet through the orifice in the piston. 2. When pressure at port HP reaches the set force of spring B, the pilot poppet opens. Pressure oil flows to port LP (hydraulic oil tank) through passage A and the periphery of the sleeve. 3. At this time, pressure difference arises between port HP and the spring chamber by the orifice. 4. When this pressure difference reaches the set force of spring A, the piston and the main poppet open, and pressure oil at port HP flows to port LP. 5. Consequently, pressure in the steering cylinder circuit decreases. 6.
If pressure in the steering cylinder circuit decreases to the set pressure value, the piston and the main poppet are closed by the force of spring A. T3-5-8