COMPONENT OPERATION / Pilot Valve OPERATION At Neutral (Pusher Stroke: Between A and B) Pilot Pressure F E 1. At the neutral position of the control lever, spool (7) completely blocks pressure oil of port P. As the outlet port is connected to port T through the notch part of spool (7), pressure at the output port is equal to pressure in the hydraulic oil tank. 2. When the control lever is moved slightly, lever (1) is tilted, and push rod (2) and pusher (3) are pushed in. Pusher (3) and spring guide (4) remain mutually connected, and move downward while compressing return spring (6). 3.
At this time, spool (7) is pushed by balance spring (5) and moves downward until the clearance in part A becomes zero. 4. During this movement, the output port remains connected with port T and pressure oil is not supplied to the output port. D C B A Pusher Stroke T505-02-07-006 Output Diagram NOTE: The lever stroke during the period when clearance (A) becomes zero is play of the control lever. T3-6-2