COMPONENT OPERATION / Pilot Valve OPERATION At Neutral 1. At neutral, spool (7) completely blocks pressure oil of port P. The output port is connected to port T through the fine control hole on spool (7). Therefore, pressure at the output port is equal to pressure at port T. 2. If the control lever is slightly tilted, disc (1) is tilted, and push rod (2) and piston (3) are pushed in. Piston (3) pushes spring guide (4) and balance spring (5) downward, and moves downward. 3. At this time, spool (7) is pushed by balance spring (5), and moves downward until the clearance at part A becomes zero. 4.
During this movement, the output port remains connected to port T and pressure oil is not supplied to the output port. NOTE: The lever stroke during the period when clearance (A) becomes zero is play of the control lever. T3-6-8