hitachi — Operation

COMPONENT OPERATION / Pilot Valve OPERATION The head of spool (6) is supported by the top surface of spring guide (3). Spring guide (3) is lifted up by return spring (5). At Neutral (Output Diagram: Between A and B): 1. At neutral, spool (6) completely blocks pressure oil of port P (from the pilot pump). As the output port is connected to port T (to the hydraulic oil tank) through the internal passage of spool (6). 2. Therefore, pressure at the output port (to the control valve) is equal to pressure at port T. 3. When the control lever is tilted slightly, cam (1) is tilted, and pusher (2) is pushed in.

Pusher (2) and spring guide (3) remain mutually and moves downward while compressing return spring (5). 4. At this time, as pressures at the output port and port T are equal, so spool (6) moves downward with the bottom surface of its head keeping contact with spring guide (3) by the force of balance spring (4). 5. This condition continues until hole part (7) on spool (6) is connected to port P. F E D C B A Lever Stroke T523-02-05-001 Output Diagram T3-6-18 Pilo Pre t ssure