hitachi — Priority Valve

COMPONENT OPERATION / Charging Block PRIORITY VALVE (REFER TO THE PILOT CURCUIT IN THE SYSTEM / HYDRAULIC SYSTEM GROUP.) 1. Pressure oil from the pilot pump flows through port P and acts on the both ends of the plunger in the priority valve. 2. As same pressure acts on the both ends of the plunger, the plunger does not move and a re- stricted amount of pressure oil is supplied to other pilot circuits. 3. When service brake accumulator pressure is ac- cumulated and is more than the set pressure, the piston of the relief valve pushes the needle valve. 4. Pressure oil in the spring chamber of the plunger flows to the hydraulic oil tank through port DR. 5.

The plunger is pushed toward the spring chamber and is shifted as the spring chamber pressure is reduced. 6. A larger amount of pressure oil from the pilot pump is supplied to other pilot circuits through the priority valve. When service brake accumulator pressure is lower than set pressure; Relief Valve From Port P Plunger (Section W-W) T4GB-03-06-005 When service brake accumulator pressure is more than set pressure; To Service Brake Circuit To Other Pilot Circuits Needle Valve Piston Service Brake Accumulator Pressure To Port DR From Port P Plunger Spring Chamber T4GB-03-06-006 (Section W-W) To Other Pilot Circuits T3-7-6