COMPONENT OPERATION / Ride Control Valve CHARGE-CUT SPOOL The charge-cut spool accumulates the operating pressure for the lift arm cylinder in the ride control accumulator, and shuts down the operating pressure from the lift arm cylinder when the ride control accumulator pressure is accumulated to the set pressure. 1. When the ride control is not operated, pressure oil at the lift arm cylinder bottom side flows to port X through port A and the orifice. 2. Pressure oil into port X flows to the spool of the charge-cut spool, opens the check valve, flows to port Y and is accumulated in the ride control accumulator. 3.
As spool sectional area M is larger than spool sectional area N, when the ride control accumulator pressure is accumulated to the set pressure, pressure oil from port X pushes the spool toward the spring. 4. When the spool moves toward the spring, the passage of pressure oil from the spool to port Y is closed, and accumulating the ride control accumulator pressure is stopped. T3-8-6