COMPONENT OPERATION / Ride Control Valve DRAIN PLUG The drain plug is provided for the ride control valve in order to return pressure oil in the ride control accumulator to the hydraulic oil tank for maintenance. If necessary, loosen the lock nut and the drain plug. Connect the accumulator port (port SP) to the tank port (port T). CAUTION: When the drain plug is loosened too much, the drain plug is removed from the valve body and oil may sprush out. Do not loosen the drain plug by 2 turns or more. Section B * Port SP Lock Nut Drain Plug Relief Valve Port T T4GB-03-08-010 *: Refer to T3-8-1. T3-8-11