COMPONENT OPERATION / Drive Unit TORQUE CONVERTER The torque converter consists of the converter wheel assembly, pump drive device, turbine shaft, and others. In the converter wheel assembly, impeller wheel (7) and turbine wheel (3) are mutually opposed with stator wheel (4) installed between them and they are all contained in the case filled with oil. Engine rotation is transmitted from the engine flywheel to the transmission through input plate (2), cover wheel (1), impeller wheel (7), turbine wheel (3) and turbine shaft (11). Hydraulic oil for the torque converter supplied from the transmission control valve enters the converter wheel through the oil passage of the stator support.
When impeller wheel (7) is rotated by the engine rotation, oil flows along the blade of impeller wheel (7) toward the periphery, and flows into turbine (3). This oil flow collides with the blade of turbine wheel (3). Therefore, turbine wheel (3) and turbine shaft (11) rotate. The output torque of turbine shaft (11) is generated by the reaction force caused by the oil flow direction change due to the blade of turbine wheel (3). Stator wheel (4) always rectifies the oil flow from turbine wheel (3) in the determined direction, and flows oil into impeller wheel (7) in order to increase torque. T3-9-2