hitachi — Proportional Solenoid Valve

COMPONENT OPERATION / Drive Unit PROPORTIONAL SOLENOID VALVE The proportional solenoid valve is used as a pilot valve for the clutch oil pressure, and supplies pressure oil to the modulation spool by receiving the electric signal from the controller and by increasing or decreasing oil pressure. Operation In Neutral: Spool (1) is pushed rightward by spring (2). Output port S is connected to tank port T. When Excited: Solenoid (3) pushes spool (1) leftward with a force in proportion to the electric current flowing through solenoid (3). Pilot pressure oil flows to output port S from port P, and the pressure at output port S increases.

This pressure at output port S acts on step part a of spool (1). A force to push spool (1) rightward occurs due to the difference of pressure-receiving area at step part a. When the pressure at output port S increases, and the force to push spool (1) rightward becomes larger than the force to push spool (1) leftward by solenoid (3), spool (1) is returned to the right, the passage between output port S and port P is closed, and the pressure at output port S stops increasing. T3-9-38