hitachi — Parking Brake

COMPONENT OPERATION / Drive Unit PARKING BRAKE The parking brake is a wet type multiplate disc brake. The brake is a negative type so that it is released only when the brake release pressure acts on the oil chamber in the brake piston. The parking brake is installed on 1st speed / 2nd speed shaft of the transmission through the disc hub. Applying Brake When the parking brake switch is turned to the ON position, the brake release pressure from the charging block does not act on the oil chamber in brake piston (5). Spring (6) moves brake piston (5) leftward and brake disc (2) and brake plate (1) come in contact tightly.

The inner surface of brake disc (2) is splined to shaft (8) through disc hub (7). The outer surface of brake plate (1) is fixed to brake housing (3). Therefore, the rotation of tightly contacted brake disc (2) is stopped so that the parking brake is applied. Releasing Brake When the parking brake switch is turned to the OFF (Release) position, the brake release pressure from the charging block acts on the oil chamber in brake piston (5). Brake piston (5) moves rightward, brake disc (2) is to be free, and the parking brake is released. T3-9-40