hitachi — Torque Proportioning Differential (TPD)

COMPONENT OPERATION / Axle Traveling Straight with the Same Resistances to Left and Right Tires In case resistances to the left and right tires are the same, distances ‘a’ and ‘b’ from the differential pinion gear center to the respective contact points of the left and right side gears are the same. Therefore, as the differential pinion gear and the left and right side gears solidly rotate forward, the driving forces of the left and right tires become the same.

Traveling on Soft Ground (Different Resistances to Left and Right Tires) In traveling on soft ground, if the left tire slips, the side gear on the left tire receiving little resistance tends to rotate more forward than the right side gear. This rotation causes deviation of the contact points of the differential pinion gear and the left and right side gears in the torque proportioning differential. In case the left side gear rotates slightly more for- ward than the right side gear, distance ‘a’ of the con- tact point of the differential pinion gear and the left side gear is lengthened. Correlation of the forces at this time is as follows.

aЧTA (force applied to the left side gear) = bЧTB (force applied to the right side gear). Until the difference of the ground resistances ex- ceeds certain value, the differential pinion gear does not roate, and the left and right side gears rotate at the same speed solidly. As the left tire does not rotate reduntantly, it does not slip. (Right tire can have drive force larger than the left tire.) Therefore, tire lives are prolonged and working efficiency is improved. Differential Pinion Gear Right Side Gear Left Side Gear T487-03-06-016 Differential Pinion Gear Right Side Gear Left Side Gear T487-03-06-017 T3-10-7