COMPONENT OPERATION / Axle Traveling Straight with the Same Road Resis- tances to Left and Right Tires As the differential pinion gear and the left and right pinion gears rotate solidly, the driving forces of the left and right tires are the same similarly to TPD. Traveling on Soft Ground (Different Road Resis- tances to Left and Right Tires) Driving force is transmitted to the case, pressure ring and spider through the ring gear. At this time, the spider having the cam construction pushes the pressure ring with thrust force (P). The clutch disc is geared with the case through the pressure ring.
As the side gears fitted to the clutch disc by spline rotate solidly with the case, the left and right gears rotate at the same speed. Like this, the left and right axle shafts fitted to the side gears by spline tend to rotate solidly with the case, and the differential movement restriction works. In case the driving force provided for the slipping tire is larger than the road resistance, part of the torque of the slipping tire is added to the tire contacting ground by the differential movement restriction (be- cause of the same speed of the left and right tires), and the tire contacting ground is provided with more torque.
Until the difference of the resistances between the left and right tires exceeds certain value (until the clutch disc begins to slip), the left and right gears solidly rotate at a constant speed. On such soft ground, the driving force increases by 1.5 times the value for TPD if LSD is provided. Clutch Disc P P Pressure Plate Spider Pressure Ring T4GB-03-10-004 T3-10-9