SYSTEM / Control System Standard Torque Control Purpose: To utilize engine output power by changing pump delivery flow rate in response to in- crease or decrease of engine speed and hydraulic oil temperature effectively. Operation: 1. When the accelerator pedal is depressed, MC calculates the target engine speed. Q 2. MC calculates the pump maximum displacement angle by receiving the target engine speed signal and hydraulic oil temperature, and transmits the signal to the pump torque control solenoid valve. Flow Rate P-Q Line 3. The pump torque control solenoid valve transmits pilot pressure according to the signal to the main pump regulator, and controls the pump delivery flow rate. NOTE:
In case the pump torque control solenoid valve becomes abnormal, standard torque control is not made. P Pressure T2-1-16