SYSTEM / Control System Forward/Reverse Selector Control while Traveling Purpose: To protect the transmission by preventing forward/reverse selector unless the vehicle speed is lowered than the set speed when traveling over the set speed. Operation: 1. In case the FNR lever is turned to reverse while traveling forward speed is higher than the allow- able speed of FNR clutch selection, MC reduces the vehicle speed shift by sending the speed shift signal in order from 4 3 2 if the speed was set in speed 4. 2. If the vehicle speed is lowered to the set speed by operation of the brake pedal, MC transmits the signal to the reverse clutch solenoid valve and tarns the clutch into reverse. 3.
When the vehicle speed increases while the ac- celerator pedal is depressed, MC shifts up by sending the speed shift signal from speed 2 to speed 3 to each speed shift solenoid valve. NOTE: In case the FNR lever is operated when the vehicle speed is below the allowable speed of FNR clutch selection, the FNR clutch is operated regardless of the speed shift. NOTE: The shift switch has two switches, and the combination of their ON varies depending on each speed shift. The controller judges which speed shift has been selected by the combination of the two input signals. NOTE: The FNR switch does not transmit the neu- tral signal.
In case of no electric current from the FNR switch, the controller judges that the switch is neutral (N). T2-1-26