hitachi — Other Controls

SYSTEM / Control System Parking Brake Indicator Control Purpose: To light the parking brake indicator on the monitor unit during parking brake operation. Operation: NOTE: The parking brake of the vehicle body is released if pilot pressure is routed. NOTE: As for operation circuit of the parking brake, refer to the SYSTEM/Electric System group. IMPORTANT: Be careful that in case the parking brake pressure sensor is abnormal, traveling is possible although the parking brake switch is ON and the parking brake is applied as the park- ing brake indicator is fixed to OFF (release). 1. When the parking brake switch is turned ON, MC confirms the signal of the parking brake pressure sensor. 2.

When pressure is below the set pressure, MC transmits the signal to the monitor unit and lights the parking brake indicator. Monitor MC ECM Engine Trans- mission Parking Brake Pressure Sensor Parking Brake Indicator Monitor Unit Parking Brake ON Parking Brake Solenoid Valve OFF T4GC-02-01-025 Parking Brake Switch T2-1-49