SYSTEM / Control System Ride Control (Optional) Purpose: To reduce fatigue of the operator by orga- nizing a damper circuit in the lift arm cylinder and reducing shock when traveling on rough roads Operation: 1. When the ride control switch is turned ON, MC makes the ride control effective and the ride con- trol indicator on the monitor is lit. 2. At vehicle speed of 7 km/h (4 mph) and above, MC receives the signal from the vehicle speed sensor and transmits current to the ride control solenoid valve. 3. When the ride control solenoid valve is operated and the spool moves, a damper circuit is organ- ized between the rod side and the bottom side of the lift arm cylinder.
When the vehicle body travels on rough roads, the fluctuation of the bottom pressure of the lift arm cylinder is absorbed by the ride control accumulator and the shock of the whole vehicle body is reduced. NOTE: The ride control is not made at the vehicle speed of 7 km/h (4 mph) and below. NOTE: In case the ride control switch or the ride control solenoid valve becomes out of order, the ride control is not made. T2-1-52