. SAFETY GENERAL PRECAUTIONS MOUNTING AND DISMOUNTING to stop it. NO PEOPLE ON ATTACHMENTS injury. DO NOT GET CAUGHT IN ARTICULATED PORTION If the clearance at the articulating portion changes, it will lead to serious personal injury. Do not allow anyone to come inside the articulation range. Never enter or put your hand, arm, or any part of your body in the movable portion between the work equipment and machine or between the cylinder and the work equipment. If someone operates the control levers by mistake, the gap between the work equipment and machine and between the cylinder and work equipment will change, and you, your hand, or arm will be caught and you may suffer serious injury.
If you have to go into a movable portion, always take action to secure the work equipment and ensure that it cannot move. PREVENTION OF BURNS Hot coolant To prevent burns from hot water or steam spurting out when checking or draining the coolant, wait for the water to cool to a temperature where it is possible to touch the radiator cap by hand before starting the operation. Even when the coolant has cooled down, loosen the cap slowly to relieve the pressure inside the radiator before removing the cap.
Hot oil To prevent burns from hot oil spurting out when checking or draining the oil, wait for the oil to cool to a temperature where it is possible to touch the cap or plug by hand before starting the operation. Even when the oil has cooled down, loosen the cap or plug slowly to relieve the internal pressure before removing the cap or plug. 2 - 13 Never jump on or off the mach If the machine starts to move when there is no operator on the machine, do n ot jump o n to the machine Never let anyone ride on the work equipment, or other attachments. There is a ha zard of fall ing and suffering