.
SAFETY PRECAUTIONS FOR OPERATION PRECAUTIONS FOR OPERATION 2 - 19 STARTING ENGINE If t here is a warning tag hanging f lever, do not start the engine or to CHECKS BEFORE STARTING ENGINE Carry out the following checks be fore starting the engine at the beginning of t he day' Remove all dirt from the surfac e of the window glass to ensure a good vie Remove all dirt from the surfac e of the lens of the front lamps, working lam ps, and rear combi nation lamp, and check that they light up correct Check the coolant level, fuel le vel, and oil level in engine oil pan, check for c logging of the air cle aner, and check for damage to the electric wirin Check that there is no mud or d ust accumulated around the movable parts of the accelerator ped al or brake pedal, and check that the pedals wor Adjust the operator's seat to a p osition where it is easy to carry out operation s, and c heck that th ere is no damage or wear to the seat belt or mou Check that the gauges work pr operly, check the angle of the lights and work ing lamps, and chec k that the control levers are all at the neutral pos Before starting the engine, ma ke sure that the work equipment lock lever i s in the LOCK positi Adjust the mirrors so that the r REAR VIEW MIRROR (PAGE Check that there are no person s or obstacles above, below, or in the area around the machine PRECAUTIONS WHEN STARTING only while seated.
Start and operate the machine Do not attempt to start the engi ne by short-circuiting the engine starting circ uit. Such an act may cause a serious bodily injury or fire. nd the horn as a warning. the operator to ride on the machine. ys check that the work equipment control levers are at the HOLD position. When starting the engine, sou Do not allow anyone apart from the operator to ride on the machine When starting the engine, alwa ys check that the work equipment control le vers are at the HOL