. SAFETY PRECAUTIONS FOR OPERATION When loading or unloading the machine, mistaken operation may bring the hazard of the machine tipping over or falling, so particular care is necessary. Always do as follows. LOADING AND UNLOADING Perform loading and unloading on firm, level ground only. Maintain a safe distance from the edge of the road or cliff. Always use ramps of adequate strength. Be sure that the ramps are wide, long, and thick enough to provide a safe loading slope. Take suitable steps to prevent the ramps from moving out of position or coming off. Be sure the ramp surface is clean and free of grease, oil, ice and loose materials. Remove dirt from the tire of the machine.
On a rainy day, in particular, be extremely careful since the ramp surface is slippery. Run the engine at low speed and travel slowly. Never correct your steering on the ramps. If necessary, drive off the ramps, correct the direction, then enter the ramps again. When loading or unloading to an embankment or platform, make sure that it has suitable width, strength, and grade. For machines equipped with a cab, always lock the door after boarding the machine. If this is not done, the door may suddenly open during transportation. Refer to "TRANSPORTATION (PAGE 3-116)". (1) (2) (3) (4) (5) Blocks Ramp Width of ramps: Same width as track Angle of ramps:
15 ° Block SHIPPING When shipping the machine on a trailer, do as follows. The weight, transportation height, and overall length of the machine differ according to the work equipment, so be sure to confirm the dimensions. When passing over bridges or structures on private land, check first that the structure is strong enough to support the weight of the machine. When traveling on public roads, check first with the relevant authorities and follow their instructions. Lock the frame with the frame lock bar to prevent the machine from articulating. For details of the shipping procedure, see "TRANSPORTATION (PAGE 3-116)" in the OPERATION section.
2 - 27 TRANSPORTATION The machine can be divided into parts for transportation, so when transportating th e machin e, please conta ct your Komatsu distributor to have the work carried out.