. OPERATION EXPLANATION OF COMPONENTS ENGINE OIL PRESSURE CAUTION LAMP 3 - 15 During operation (eng ine running) ng oil pressure goes down during operation, g oil pressure caution lamp and central and the alarm buzzer sounds intermittently. If t he engine lubricati ng oil pressure goes do wn during operation, th e engine lubricatin g oil pressure cautio n lamp a nd central warning lamp light up and the alarm buzzer s ounds int ermittently. At the same time, "E0 3 CALL" and "CHECK R IGHT NO W" are displayed on the character display in turn. Sto p the machine immediately in a safe place, then st op the en gine and inspect it.
During checks before starting (starting switch at the O N position, engine stopped) the l amps are lighted up, an d when th e engine is started, the lamps go out. BATTERY CHARGE CIRCUIT CAUTION LAMP running to warn the This lamp (3) lights up when the engine is he operator that an abno rmality has occurred in the charg ing circuit. During checks before starting (starting switch at the O N position, engine stopped) the l amps are lighted up, an d when th e engine is started, the lamps go out. During operation (eng ine running) urs in the charging circuit during operation, cuit caution lamp and central warning lamp buzzer sounds intermittently.
If an abnormality occ th e battery charge cir cuit caution lamp and c entral wa light up and the alarm buzzer sounds intermittently. At the same time, "E0 3 CALL" and "CHECK R IGHT NO W" are displayed on the character display in turn. Sto p the machine immediately in a safe place, then st op the en gine and inspect it. STEERING OIL PRESSURE CAUTION LAMP (Red) (Red) (Machines equipped with Emergency steerin steering oil During operation (eng ine running) ressure goes down during operation, the caution lamp and central warning lamp light zer sounds intermittently.
If the steering oil p ration, he steering oil pressure caution lamp and centra l warning light up and the alarm buz zer sounds intermittentl At the same time, "E0 3 CALL" and "CHECK R IGHT NO W" are displayed on the character display in turn. Sto p the machine immediately in a safe place, then st op the en gine and inspect it. During checks before starting (starting switch at the O N position, engine stopped) the l amps are lighted up, an d when th e engine is started, the lamps go out.