Instructions for ST assembly 210 MW Bandel India Document number: S12003-YK09-05MAA-747002 Tylova 57l 31600 Plzeň l Českб Republika · Ohra žte a označ t e pracoviště, vybud ujte montбžnн plošin y a postavte lešenн v potřebnйm rozsahu pro kontrolu zбkladu, proveďte uzemněnн a bezpečnostnн označenн lešenн a plošin, zakrytovбnн děr, vyznačenн ъnikovэch cest. · Kontrola připravenosti zбkladu: Proměřte sprбvnost pozic všech děr pro kotevnн šrouby, p olohu otvorů a rozteče přнčnэch os. Nechte si předložit protokol o proměřenн celйho zбkladu. Potй proveďte převzetн zбkladu od stavebnн firmy na zбkladě tohoto protokolu. Přejнmku na elektrбrně provede zбstupce DSPW pro jakost.
Součбstн předбvanй dokumenta ce zбkladu musн bэt protokol o proměřenн převэšenн nivelačnнch bodů na nezatнženй hornн a spodnн zбkladovй desce turbostolice vůči nezбvislйmu vэškovйmu bodu ve strojovně metodou VPN. Stav pracн: Betonovэ zбklad je připraven pro zahбjenн instalace podpěrnэch kotevnнch prvků turbosoustrojн. Instalace všech nivelačnнch čepů zбkladu je dokončena a jejich poloha na nezatнženйm zбkladu zaznamenбna .
· Build the fencing and mark the workplace, erect the provisory platforms and scaffolding in necessary scope for the foundation checking, carry out the earthing and safety marking of scaffolding and platforms, holes covering, marking of emergency routes · Check the foundation readiness: Cross- check the right position of holes for anchor bolts, positions of the openings and the pitch of transversal axis. Let the produce the report about the measurement of the whole foundation. Then take over the foundation from the civil work contractor based on the above mentioned report. The acceptance is done by the DSPW Deputy for Quality Assurance in accordance with the Quality plan.
The part of the handover documentation of the foundation has to be a report about the camber measuring among the independent leveling points of unloaded upper and lower foundation slab by method VPL. Work status: The concrete foundation is ready for TG supporting foundation element’s installation. Installation of all leveling pegs into concrete foundation is complete and their position on the unloaded .foundation is recorded. turbiny: Instrukce pro montбž kotevnнch klнnů Š KODA: · Proveďte ъ pravu lešenн a plošin:
vybudujte montбžnн plošin y do otvorů pro tělesa turbiny v hornн zбkladovй desce cca 1 m pod ъroveň povrchu zбkladovй desky · Zakreslete polohu všech podložek pro kotevnн klнny na povrch betonu, dle vэkresu “ Šrouby zбkladovй sestavenн “ č. Tp6075643 . elements of turbine: Instruction for assembly of anchoring wedges Š KODA · Modification of scaffolding and platforms: build up the provisory platforms into openings for turbine casing in upper foundation slab approx. 1 m under surface of foundation slab · Draw the position of the foundation plates of anchor wedges on concrete according to the drawing „ Foundation bolts Tp6075643 .
Assembly of the supporting foundation Montбž podpěrnэch kotevnнch prvků parnн Date: 12.11.2013 Page 117 / 278 Prepared: O.Baroch Last Revision: Approved: P.Lešetickэ