DOOSAN ŠKODA POWER — DOOSAN ŠKODA POWER Steam Turbine Assembly Manual

BANDEL STEAM TURBINE 210 MW - SCREW / BOLTґs TIGHTENING *) tighten bolts so that shall be metallic contact between valves body No.1 and valves covers No. 2,3 (informative tightening torque with sliding varnish for M56x4 2870 Nm) **) tighten bolts so that shall be metallic contact between valves body No.1 and stop valve (informative tightening torque 980 Nm with sliding varnish) ***) tighten bolts so that shall be metallic contact between valve cover No. 2,3 and body of gland No. 16,17 (informative tightening torque 160 Nm with sliding varnish) 11) Bodies with IP Stop & Interceptor valves (Tp 055193/I):

*) tighten bolts so that shall be metallic contact between diffuser No.6 and valve chamber No.1 **) tighten nuts so that shall be metallic contact between cover No.4 and bush No.5 Date: 9.8.2013 The last revision: 16.9.2013 Page no.: 8 of 9 Worked out by: O. Baroch ŠKODA rapid + 3 M12 - - 61 Tp817206 51 15320.5 26 Molykote G rapid + TORQUE TIGHTENING NO.

OF NUT THREAD DRAWING NUT TORQUE HEAD SPECIFICATION POSITION DRAWING SCREW POSITION MATERIAL TORQUE [Nm] NOTE 80 M64 x 4 Tp6039866 65 75 Tp6042106 60 1.4913+QT 4500 With slide lack 44 M30 Tp6034087 46 76* Tp6026021 63 1.4913+QT 450 With slide lack 32 M24 - 36 - Tp6023026 67* 1.4913+QT 230 (inf.) With slide lack 16 M24 Tp809626 36 77** Tp6042791 68 1.4913+QT 180 (inf.) With slide lack 16 M20 Tp6034084 30 78 Tp6047560 69 1.4913+QT 130 With slide lack 12 M20 - 30 - Tp6023052 70 1.4913+QT 170 With slide lack 12 M16 Tp6034083 24 79 Tp817164 71 1.4913+QT 32 With slide lack