Deutz — Removing and installing the exhaust gas return valve

Exhaust system/Charging D 2011 W 06-09-06 ●Clean sealing surfaces. ●Mount gasket (1). ●Mount exhaust gas collection pipe (2). ●Fasten screws (3). ●Tighten screws (3). 1 20 Nm 3 3 2 6 © 46939-1 ●Insert pipe (5). ●Mount new sealing rings (4). ●Screw on hollow screw (3). ●Mount sealing rings (2). ●Screw on hollow screw (1). 2 ●Tighten hollow screw (1). 1 29 Nm ●Tighten hollow screw (3). 12 Nm 5 4 3 © 46938-0 ●Insert pipe (1). ●Mount sealing rings (2). ●Screw on hollow screw (3). 2 ●Mount new sealing rings (4). ●Turn in hollow screw (5). 3 ●Tighten hollow screw (3). 29 Nm ●Tighten hollow screw (5). 29 Nm 4 1 5 © 46935-1 © 01/2009 OBJ_DOKU-23498-001.fm 5/8