Exhaust system/Charging D 2011 W 06-09-09 Removing and installing the sensor (Exhaust gas recirculation) Standard tools Attention! If the sensor (exhaust gas return) is exchanged/adjusted, the engine must be set on the engine test bench. Special tools: Special bit, 70 mm long 9120 6 Remove sensor ●Disconnect the battery. ●Unscrew screw (1) with special bit. ●Remove safety cover (2). ●Unlock cable plug (3) and remove. 2 1 3 © 46964-1 ●Unscrew screws (1). ●Swing fuel filter console (2) to the side. 2 1 © 46973-0 © 01/2009 OBJ_DOKU-23501-001.fm 1/4