Deutz — Removing and installing the fuel injector pump

D 2011 Fuel system TD 2011 W 07-04-01 Removing and installing the fuel injector pump Standard tools W 07-03-01 W 07-06-03 W 07-06-01 W 07-10-06 W 11-00-03 W 12-01-04 Special tools: Ajustable bolt 100710 Rig pin 101100 Test template 103040 Special pliers 103220 Disassembly tool 110901 Plugs/caps 170160 Danger! Wait 30 seconds after switching off the engine before working on the fuel system. Fitting compound DEUTZ AP1908 Attention! Pay attention to utmost cleanliness when working on the fuel system. Remove residue paint and particles of dirt before removing. Clean the respective affected parts carefully. Blow damp areas dry with com - pressed air.

Observe the safety regulations and natio - nal specifications for handling fuels. Close all connections immediately after opening with new, clean plugs/caps. Do not remove plugs/caps until immedia - tely before assembling. Collect leaking operating substances in suitable vessels and dispose of according to regulations. After all work on the fuel system, it must be bleeded - see the operation manual, chap - ter "6 Fuel system“. 6 The following work procress is described for a cylinder as an example. Removing the fuel injector pump ●Unscrew all screws (1). ●Remove cylinder head cowling (2). ●Remove gasket. D 2011 i 1 ●Remove V-belt pulley.

W 12-01-04 2 © 47011-0 © 01/2009 OBJ_DOKU-23505-001.fm 1/12