Deutz — Calculating the thickness of shim

D 2011 Fuel system TD 2011 W 07-06-03 ●Read and note installation dimension "X" from the rating plate of the respective injection pump. The installation dimension "X" serves to calculate the shim/gasket. X Do not measure on the removed injection pump. The exact installation dimension "X" is specified on the injection pump's rating plate. Example: 6088 Installation dimension "X" = 60.88 mm 6 © 47494-0 ●Calculate thickness of the shim "S s ". ●Select shim using table. P07 21 ●Install injection pumps. W 07-04-01 Calculation for conversion of the injection punps, of camshaft 11.0 mm on 11.7 mm stroke, without converting the camshaft - see following example of calculation.

© 39877-1 ●Select shim using table. P07 21 ●Install injection pumps. W 07-04-01 © 11/2009 OBJ_DOKU-23507-001.fm 3/4 alculation example esired: - Thickness of shim S s iven: - Installation dimension of the injection pump X Measured: - Depth gauge A alculation: S = X – A o S = 60,88 mm – 60,25 mm o esult: S = 0,63 mm o alculation example esired: - Thickness of shim S s iven: - Installation dimension of the injection pump X Measured: - Depth gauge A alculation: S = X – 0,7 mm – A o S = 61,60 mm – 0,7 mm – 60,25 mm o esult: S = 0,65 mm o