D 2011 Fuel system TD 2011 W 07-11-01 Removing and installing the fuel supply pump Standard tools: Hose clip pliers 8011 Danger! Wait 30 seconds after switching off the engine before working on the fuel system. Special tools: Disassembly tool 110901 Plugs/caps 170160 Attention! Pay attention to utmost cleanliness when working on the fuel system. Remove residue paint and particles of dirt before removing. Clean the respective affected parts carefully. Blow damp areas dry with com - pressed air. Observe the safety regulations and natio - nal specifications for handling fuels. Close all connections immediately after opening with new, clean plugs/caps.
Do not remove plugs/caps until immedia - tely before assembling. Collect leaking operating substances in suitable vessels and dispose of according to regulations. After all work on the fuel system, it must be bleeded - see the operation manual, chap - ter "6 Fuel system“. Fitting compound DEUTZ AP1908 Lubricating oil 6 Removing the fuel supply pump ●Pull out oil dipstick (1). 1 © 47394-0 © 01/2009 OBJ_DOKU-23515-001.fm 1/6