D 2011 General TD 2011 W 00-02-06 Checking the compression pressure Standard tools: Compression pressure tester 8005 W 01-01-01 W 07-07-01 Special tools: Connector 100120 Attention! Pay attention to utmost cleanliness when working on the fuel system. Remove residue paint and particles of dirt before removing. Clean the respective affected parts carefully. Blow damp areas dry with com - pressed air. Observe the safety regulations and natio - nal specifications for handling fuels. Close all connections immediately after opening with new, clean plugs/caps. Do not remove plugs/caps until immedia - tely before assembling.
Collect leaking operating substances in suitable vessels and dispose of according to regulations. After all work on the fuel system, it must be bleeded - see the operation manual, chap - ter "6 Fuel system“. 6 Checking the compression pressure ●Set valve clearance. W 01-01-01 ●Removing fuel injectors. W 07-07-01 ●Mount sealing ring (1). Use sealing ring (1) for fuel injector. 2 ●Insert connector (2). 1 © 47001-1 © 01/2009 OBJ_DOKU-23456-001.fm 1/6