Deutz — Setting valve clearance

D 2011 Cylinder head TD 2011 W 01-01-01 Arrangement of the inlet and exhaust val - ves. IN = inlet valve EX = exhaust valve Valve overlap means: The inlet valve starts opening,exhaust valve closes. Attention! In case of internal exhaust gas recircula - tion, the inlet valve is opened briefly by an additional cam on the camshaft. This is not to be confused with the valve overlap. 6 IN EX EX IN © 39133-2 ●Select feeler gauge. ●Check the setting on the appropriate valve. The feeler gauge must pass between the rocker arm's sliding surface and the valve without too much resistance. © 39135-1 Setting valve clearance ●Loosen lock nut (1). ●Hold adjusting screw (2). ●Set valve clearance.

If there is not enough valve clearance, unscrew setting screw (2). 2 If there is too much valve clearance, turn in setting screw (2). Inlet 0.3 mm Outlet 1 0.5 mm © 39136-1 © 01/2009 OBJ_DOKU-23458-001.fm 2/6